The GGD type AC low-voltage switchgear consists of a cabinet, universal circuit breaker, molded case circuit breaker, switch disconnectors (isolators), copper busbars, N busbars, PE busbars, PVC insulated wires, busbar clamps, insulating support bars, and other components. The cabinet is made of cold-rolled steel sheets with an epoxy powder electrostatic coating, and the cabinet frame is assembled from shaped steel using bolts. The cabinet has a closed structure, and all electrical components inside are fixedly installed. It is suitable for power devices in distribution systems of power plants, substations and industrial enterprises.
The XL-21 distribution cabinet consists of a cabinet, molded case circuit breakers, copper busbars, neutral busbars, protective earth busbars, PVC insulated wires, and insulators. The cabinet is made of cold-rolled steel plate, and through bending and partial welding processes, its rigidity and load-bearing capacity are ensured to meet the installation requirements of the electrical components.
ATS is an electrical device that automatically switches a power load between two sources. Typically, it’s used in settings where a backup power source, such as a generator or battery, is available.If the primary power source (like the grid) fails, the ATS will automatically switch to the secondary power source to ensure continuous operation.
The GCS type AC low-voltage switchgear consists of a cabinet, universal circuit breakers, molded case circuit breakers, openable knife switches (isolators), copper busbars, neutral busbars, protective earth busbars, PVC insulated wires, busbar clamps, and insulating support strips. The cabinet is made of cold-rolled steel plate with a light beige epoxy powder electrostatic coating.
GGJ integrates reactive power compensation and grid monitoring, can compensate the reactive power loss in the power grid, improve the power factor, reduce the line loss, thereby improving the load capacity and power quality of the power grid.
The MNS low-voltage withdrawable switchgear mainly consists of circuit breakers, AC contactors, thermal overload relays, insulating supports, busbars, and a housing. It is assembled from 2.0mm thick cold-formed steel through partial welding.
HomeTelMailInquiry
